Doing DIY home improvement projects is a good idea, especially if you want to save some money and when you want to put a personal touch to your home. DIY projects are easier to carry out when you know how to handle power tools. However, just because you know how to make use of jacks and saws doesn’t mean that you can perfectly carry out any home improvement project.
There are quite a few things that you may fail to do perfectly. Those things could include building codes, rules, and regulations, and everything that the government has something to say about. If you do not comply with the building codes, then you are bound to receive a violation notice from the ECB which will eventually require you to pay a hefty fine. Aside from that, you might even have to redo the entire project.
You might think that no one will notice if you don’ follow these building codes, especially if it is at the back of your house. Do take note though that the real intention of having these building codes in place is to ensure that the house is safe and healthy. In the future, when you end up selling your home, you might find it more costly since an inspector will come and search for these violations thoroughly.
To avoid these violations, it is imperative that you get a permit. If you don’t get a permit, you may be able to cut down on the cost you have to pay now, but that doesn’t mean that you won’t suffer from repercussions in the future. It is certainly a big mistake for homeowners to skip on getting the right permits when doing DIY home improvements.
Another way to avoid problems and violations is to ensure that the bathroom has proper ventilation. Make sure that the fan is not venting into an enclosed space. That is practically a violation of the code. Venting into an enclosed space can eventually lead to rotten wood and mold growth which can be extremely harmful. The ventilation system should have a good exit point.
Regarding the wiring, don’t just be happy that you have already wired a new outlet into your remodeled bathroom. Always make sure that the electrical connections are wired inside an approved junction box. Not only is that meant for following the building code, that can also prevent fires from breaking out. The junction box must be easily accessible and visible. Wires going into the box must be clamped to prevent movement too.
Check the ledger. The deck must be properly attached to the house with a secure and safe ledger board. Safer techniques for deck construction are in place right now, and they must be followed. The ledger must be directly screwed or bolted to the house framing. Moreover, it must be protected against moisture damage with the proper flashing.
Smoke detection can be installed by the homeowner personally, but there are guidelines to follow to ensure that it does not violate the building code. Every floor of the house must have a smoking detector. It should be found inside the sleeping area as well as outside the bedroom entry. The alarms must be away from the walls by at least four inches. Check with the building department for a full list of requirements to follow in installing the smoke detector.